again.netlify.app

1. Konica Minolta Bizhub 420 Service Manual Pdf
2. Konica Minolta Bizhub 420 Service Manual
3. Konica Minolta Bizhub 420 Manual

The Konica Minolta Guide to LDAP

• TopNavi 10Text; TopNavi 11Text; TopNavi 15Text; Ver.8.00.00.
• View and Download Konica Minolta BIZHUB 420 user manual online. Network Scanner Operations. BIZHUB 420 All in One Printer pdf manual download. Also for: Bizhub 500.

This guide details how to set up the:

Bizhub 250/350, 420/500, 361/421/501, 600/750 Bizhub C250, C252, C300, C351, C352, C450 Bizhub C203, 253, 451, ,550, 650

Enjoy the bizhub i-Series with the 7 inch tablet-like panel, the best User Experience of the market, the number one Security features with the embedded Bitdefender® anti-virus scan engine (optional), Remote Services, Konica Minolta IT Services and much more.

Created by Hotline Support

Konica Minolta Hotline Support (UK)

V1.2

LDAP, Lightweight Directory Access Protocol, is an Internet protocol that Konica Minolta machines can use to look up E-Mail

Addresses from a server running Active Directory with LDAP Service* *Server 2008, LDAP is installed separately to Active Directory*

To set up LDAP on the Konica Minolta Bizhub machines, please follow the instructions below: NB: this is a guide only and is not indicative of actual settings for your network or machine as the LDAP structure varies from Network to Network and machine.

It is advisable for the Network Administrator to configure settings as a knowledge of the Network is required.

C250, 252, C300, C351, C352, C450, BH420/BH500, BH600/BH750

Setting up via the Control Panel –

1)Press on Utility/Counter

2)Press on Administrator Setting and enter the Admin code of 12345678

3)Press on Network Setting

4)Press on LDAP Setting

5)Press on ‘Enabling LDAP Function’ and select ‘ON’. Press ‘OK’

6)The machine will then take you out of Network Settings and you will have to follow steps 3 & 4 again

7)Press on ‘Setting Up LDAP’ and the following screen will appear

8)Enter the IP address of the server where LDAP is configured

9)Enter in the ‘Search Base’ of the domain.

As a rough guide you can find the domain by right clicking ‘My Computer’ and going in to the Properties. Under the ‘Computer Name’ tab it will say ‘Domain’ as below. The basic rule for the Search Base is if the customer has a separate container of employee e-mail addresses that are outside of the root of the domain this must also be specified. If they do not, you only need to input the root.

For example, the customer has a container called Sales, and his domain is mydomain.co.uk. The search base would be: ou=Sales,dc=mydomain,dc=co,dc=uk

Without the Sales container, it would be dc=mydomain,dc=co,dc=uk(Searches entire domain)

My Computer Properties

10)Press the ‘FWD’ button to progress to the next screen

11)These next settings are very much dependent on the customer’s server and how it has been set up. For example, the Hotline in Basildon runs on a different network to the LDAP server. On our machines, we have to set the ‘General Settings’ to ‘Simple’ but on the next screen we have to force the domain within the User Name. On other machines in the building that are on the same network as the server, ‘General Settings’ are set to GSS-SPNEG0 and the domain does not need to forced.

12)Press the ‘FWD’ button to progress to the next screen

Konica Minolta Bizhub 420 Service Manual Pdf

13)Enter the ‘Login Name’ and ‘Password’ of an account that is set up on the server.

This is us forcing the domain

14)Enter in the ‘Domain Name’ as discovered in Step 9.

15)Press the ‘FWD’ button to progress to the next screen

16)Set as required

On the machine, a ‘Check Connection’ button will appear here. Once you have entered the settings, press on this button to ensure the machine can see the LDAP server

Set up of LDAP is now complete.

You can also set this up via a web browser.

To do this, follow the instructions below:

4-channel stereo multiplexed WM8775SEDS placed on X-Fi Fatal1ty ProThe audio processor on X-Fi was the most powerful at its time of release, offering an extremely robust sample rate conversion engine in addition to enhanced internal sound channel routing options and greater 3D audio enhancement capabilities. Pro, Their internal hardware components are different for various usages and needs for gaming, surround, or audiophile standards.X-Fi features. A significant portion of the audio processing unit was devoted to this resampling engine. Most digital audio is at 44.1 kHz, a standard no doubt related to, while sound cards were often designed to process audio at 48 kHz. The SRC engine was far more capable than previous Creative sound card offerings, a limitation that had been a major thorn in Creative's side. Creative fatal1ty drivers.

1)Enter the IP address of the Konica Minolta machine into Internet Explorer and press Go

2)Log into the web page using the Admin code for the machine. Depending on which machine you have, this will either be 8 x 0’s (00000000) or 12345678.

3)Click on the Network tab at the top of the screen

4)Then click on LDAP

5)Once you have input the settings, be sure to click on ‘Check LDAP Setting’

Bizhub 250/350

Setting up via the Web Browser-

It is easier to configure the Bizhub 250/350 via the web interface.

1)Log into Admin Mode using the code of 8 x 0’s (00000000) and click on the Network tab. Make sure you enable LDAP under the ‘LDAP’ heading before you go into ‘LDAP Server Setting’

2)Select any available set of 3 dashes(allowed up to 5 servers) we will assume Hot2003 does not exist

3)The LDAP Server screen opens as below, you may need to force the domain as shown. Search base will be your FQDN in dc=, format. Domain Name would be your normal domain logon name.

Forcing the

Domain

Bizhub C203 – 650 (Bizhub 361-501 is similar)

Setting up via the Control Panel –

At Machine:

1.Press Utility/Counter

2.Press “Administrator Settings”

3. Enter the Administrator Password, default = 12345678 and press “OK”

4. Press “Fax Settings”

5. Press “Function Settings”

6. Press “Forward TX Setting”

7. Press all as arrowed then “Select from Address Book”

8. Here you have a couple of options, you can select “Index” and search for a recipient or select “Destination Type” and “E-Mail” then select the recipient. The latter is shown below

8.Press “OK” you will then be returned to the screen as in 7 only this time you will see your selected recipient in the Forward Dest. Dialogue box.

9. Press “OK” then “Close” until back to main screen

Setting up via the Web Interface-

Konica minolta dimage z6 manual. View and Download Konica Minolta DiMAGE X50 instruction manual online. Konica Minolta DiMAGE X50 digital camera Instruction Manual. DiMAGE X50 Digital Camera pdf manual download. View and Download Konica Minolta DiMAGE X50 instruction manual online. Konica Digital Camera INSTRUCTION MANUAL X50. DiMAGE X50 Digital Camera pdf manual download. DiMAGE Image Viewer Utility Version 2 Instruction manual (PDF) Camera manual (PDF) Documentation (Printed): Quick Reference Guide Warranty card This product is designed to work with accessories manufactured and distributed by Minolta. Using accessories or equipment not endorsed by Minolta may result in unsatisfactory performance or dam. Product description. MD) CL) AA) MIN DIMAGE X50 DIG CAM From the Manufacturer. Konica Minolta Photo Imaging U.S.A., Inc.' S Dimage X50 5.0 megapixel digital camera offers an array of high-end features and functions, to give photographers all they really need in a fast and easy-to-use digital camera.

1.Enter the IP address of the Konica Minolta machine into Internet Explorer and press Go

2.Log into the web page using the Admin code for the machine.

Default = 12345678.

3.Click on the Network tab at the top of the screen

4.Then click on LDAP Setting and set to Enable

4)Select “Setting Up LDAP” and select any available radio button. we will assume Hot2003 does not exist.

5. Select “Edit”

6. Enter you network settings in the dialogue box’s including password. The copier will use the Admin credentials to interrogate LDAP (none of this is seen by end user)

6.Select “OK” you will then be returned to the screen as in 5-6 above, where you can ‘Test’ the connection. If all OK you can Logout.

To use the LDAP search function the procedure will vary slightly depending on the machine model. For this example we will use the Bizhub C550.

For File Type selection please refer to the relevant User Manual

User Mode:

1.Place Document(s) in document feeder

2.Select “FAX/SCAN”

3.Select Address Search Tab

4.Select “Search”

5.Enter firstname or lastname or part thereof

6.Select “Start Search”

7.Machine will retrieve names from the LDAP server matching search criteria

8.Select Recipient(s) - *Select “Name-Dest” then name*Only if Fax Unit Fitted

9.Select “OK”

10.Press “Start”

Setting up and Printing using User Authentication on Bizhub’s C203-C650

Machine used for Example Bizhub C550

Login to the machine’s web browser as Administrator

Set up machine to “look” at LDAP Server before enabling Authentication , if machine can already search LDAP for basic email search then any errors with this set up will most likely be due to configuration and not machine.

Click on “Security” then “External Server Registration” then “Edit”

Click on “Edit” and enter details as per your network

Click “OK” then “OK” to confirmation message, you will then be returned to the screen shown previously only now you will see the server listed. You can add multiple servers if required

Click on “User Auth/Account Track” enable function as “General Settings” highlighted below

Showing Enabling User Authentication - option can be set for Public User Access for BW access if required. Default Function permissions can also be set if required, eg: Total copy/print restriction (ALL users).

Click “OK” to all Messages then Logout.

User Mode

User is shown Logon Screen on Copier consisting of:

•Username (1)

•Password (2)

Konica Minolta Bizhub 420 Service Manual

•Domainname (3)

(1)Users Domain Login Name

(2)Users Domain Password

Konica Minolta Bizhub 420 Manual

(3)No need to touch (fixed - unless multiple servers/domains are used)

Press “Login”

The Machine will now Authenticate against the Domain Controller all machine functions should now be available.

NB:Once a user has successfully logged into the machine an account will be created on the machine consisting of “username” for usage accounting tracking purposes